EDL4096-470G2M
Edmund GigE interface industrial line scan camera. It supports conventional ISP functions, supports bright/dark field correction, supports lens shadow, distortion correction, light source uniformity correction, etc.; Built-in large-capacity frame buffer, safe and reliable verification and repair technology to ensure transmission; Support wide working voltage, low power consumption design; The software is compatible with GigE Vision, GenlCam protocol, etc.
| Performance | Parameters |
|---|---|
| Sensor Type | CMOS,Global Shutter |
| Resolution | 4096× 4 |
| Pixel Size | 7.0μm× 7.0μm |
| Sensor Optical Size | 28.73mm |
| Color/Mono | Mono |
| Imaging Mode | 4Line, 1 Line mode: 70K continuous output, 160K burst transmission |
| Maximum Line Rate | 2 TDI mode: 70K continuous output, 88K burst transmission 4 TDI mode: continuous out 45K, burst transmission 45K |
| Data Rate | 2457.6Mb/s |
| Dynamic Range | 63 dB |
| Gain | 1x-16x， Step 0.125x |
| Exposure Time | 3.237us-40ms, step 1us |
| Exposure Mode | Support manual exposure, single exposure, automatic exposure, pulse width control exposure |
| Flash Mode | Support 4-way Multi-Field |
| Target Image Format | Mono8、Mono12Packed |
| Pixel Merge | 1x2、1x4、2x1、2x2、2x4、4x1、4x2、4x4 |
| Mirror Image | Supports horizontal mirroring |
| Trigger signal source | Internal trigger, external trigger |
| External Trigger Mode | Line trigger, frame trigger, line+frame trigger |
| Line Rate Control | Internal multiplier/splitter (external trigger), software setting (internal trigger) |
| Image Buffer | 4Gbit |
| ISP Function | FPN correction, light and dark field correction, lookup table, Gamma, multi-group lens distortion correction, light source, correction, contrast, black level |
| Electrical Characteristics | |
| Data Interface | 2.5G network port |
| I/O Interface | 1 frame signal input, 2 line signal inputs, 4 single-ended outputs, configurable as 2 differential outputs, 3 general-purpose inputs (1 differential input and 2 single-ended inputs), multiplexed with outputs |
| Power supply | DC 12V-24V（ ± 10%） |
| Typical Power Consumption | 4.5W @24V DC |
| Structure and environmental parameters | |
| Lens Connection | M42*1, optical back focus 12mm |
| IO and Power Connection | 12 pin industrial circular connector |
| Filter | Full Band Transparency Enhancer |
| Dimensions | 62mm×62mm×36.8 mm |
| Weight | Approx. 245g |
| IP Protection | IP40 (with lens and cable properly installed) |
| Temperature | Operating Temperature: -10℃ ~ 50℃, Storage Temperature: -20℃ ~ 70 |
| Humidity | 5% ~ 90%RH (non-condensing) |
| Software and Protocols | |
| Software | SDK development kit, and associated demo/calibration software DemoCam3 |
| Protocols/Standards | GenICam |
| Compatible Software | Halcon、LabVIEW、MV Viewer、eBUS、MVS |
| Certifications | CE、RoHS |
| Performance | Parameters |
Key Features
- 4K Pixel, 7μm Pixel, 4-TDI, Mono
- 2.5G bandwidth, 70KHZ Line Rate
- Support bright/dark field correction, lens shadow correction, light source correction, black level
- Transmission distance 100 meters, strong anti-interference ability
- Built-in large-capacity image cache
- Support GenICam software interface
- 4.5W low power consumption
- Overall Dimension: 62mm×62mm×36.8mm
Dimension Drawing
Spectral Response
