EDL4096-410GMNIR

Edmund GigE interface industrial line scan camera. It supports conventional ISP functions, supports bright/dark field correction, supports lens shadow, distortion correction, light source uniformity correction, etc.; Built-in large-capacity frame buffer, safe and reliable verification and repair technology to ensure transmission; Support wide working voltage, low power consumption design; The software is compatible with GigE Vision, GenlCam protocol, etc.

Performance	Parameters
Sensor Type	CMOS Global Shutter
Pixel Size	7.0μm×7.0μm
Resolution	4096×4
Spectral Range	NIR
Imaging Mode	1Line /2Line/ 4Line TDI
Maximum Line Frequency	Burst mode: 110K Continuous mode: 30K (1Line mode)
Data Rate	123.5MB/S
Dynamic Range	65 dB
Pixel Bit Width	10 bit
Gain	1x-16x, 0.125x adjustable step
Exposure Time	4us–40ms，0.2us adjustable step
exposure mode	Support auto exposure/manual exposure/one-touch exposure/fixed exposure/pulse width control exposure
Pixel Formats	Mono 8/12
pixel merge	1x1,1x2,1x4,2x1,2x2,2x4,4x1,4x2,4x4
Image Reverse	Horizontal Reverse
Trigger Mode	Eeternal Trigger、Internal Trigger
External Trigger Mode	Line Trigger, Frame Trigger, Line+Frame Trigger
Line frequency control	Software configuration, encoder control, external pulse frequency control, internal camera frequency doubling/splitting
Image Buffer	4Gbit
ISP	FPN Correction / Light and Dark Field Correction / Look-up Table / Multi-Group Lens Aberration Correction / Light Source Correction / Noise Reduction
Electrical Characteristics
Data Interface	Gigabit Ethernet （ 1000Mbps）
I/O	1 channel frame signal input (optocoupler isolated), 2 channel line signal input (AB phase), 1 channel flash output (optocoupler isolated)
Power Supply	DC 12V~24V （ ±10%）； Without POE
Typical power consumption	2.8W @12VDC
Structure and environmental parameters
Lens Mounts	M42*1.0, flange back focus 12mm, can be adapted to F-mount, C-mount and other threaded lenses through the adapter ring.
IO and Power Interface	12 pin industrial circular connector
Optical filter	Visible Cut-off Filter
Dimension	59mm×59.0mm×33.5mm
Weight	Approx. 211g
IP Protection Rating	IP40 (with lens and cables installed correctly)
Temperature	Working temperature: -10℃~50℃, storage temperature: -20℃~70℃.
Humidity	5% ~ 90%RH (no condensation)）
Software and Protocols
Software	SDK development kit, and associated demo/calibration software DemoCam3
Operating Systems	Windows7/10 32/64bit； PC Linux 32/64bit
Protocols/Standards	GigEVision， GenICam
Certifications	CE， RoHS
Performance	Parameters

Key Features

In the near infrared spectrum High sensitivity, low noise.
Support 1-wire, 2-wire, 4-wire TDI.
Support bright/dark field correction, support lens shading, aberration correction, light source uniformity correction, etc.
Support multiple groups of lens aberration correction parameter writing and storage.
Built-in large-capacity frame buffer, safe and reliable verification and repair technology to ensure reliable transmission.
Frame timeout function to improve the camera’s fault tolerance for long mechanical motion jams.
Software compatible with GigE Vision, GenlCam protocols.
Dimensions: 59mmx59.0mmx33.5mm

EDL4096-410GMNIR

Key Features

Dimension Drawing

Spectral Response