EDL4096-410GM

Edmund GigE interface industrial line scan camera. It supports conventional ISP functions, supports bright/dark field correction, supports lens shadow, distortion correction, light source uniformity correction, etc.; Built-in large-capacity frame buffer, safe and reliable verification and repair technology to ensure transmission; Support wide working voltage, low power consumption design; The software is compatible with GigE Vision, GenlCam protocol, etc.

Performance	Parameters
Sensor Type	CMOS Global Shutter
Pixel Size	7.0μm×7.0μm
Resolution	4096×4
Spectral Range	Mono
Imaging Mode	1Line /2Line/ 4Line TDI
Maximum Line Frequency	Burst mode: 120K Continuous mode: 30K (1Line mode)
Data Rate	123.5MB/S
Dynamic Range	65 dB
Pixel Bit Width	10 bit
Gain	1x-16x, 0.125x adjustable step
Exposure Time	4us–40ms，0.2us adjustable step
exposure mode	Support auto exposure/manual exposure/one-touch exposure/fixed exposure/pulse width control exposure
Pixel Formats	Mono 8/12
pixel merge	1x1,1x2,1x4,2x1,2x2,2x4,4x1,4x2,4x4
Image Reverse	Horizontal Reverse
Trigger Mode	External Trigger、Internal Trigger
External Trigger Mode	Line Trigger, Frame Trigger, Line+Frame Trigger
Line frequency control	Software configuration, encoder control, external pulse frequency control, internal camera frequency doubling/splitting
Image Buffer	4Gbit
ISP	FPN Correction / Light and Dark Field Correction / Look-up Table / Multi-Group Lens Aberration Correction / Light Source Correction / Noise Reduction
Electrical Characteristics
Data Interface	Gigabit Ethernet （ 1000Mbps）
I/O	1 channel frame signal input (optocoupler isolated),2 channel line signal input (AB phase), 1 channel flash output (optocoupler isolated)
Power Supply	DC 12V~24V （ ±10%）； Without POE
Typical power consumption	2.8W @12VDC
Structure and environmental parameters
Lens Mounts	M42*1.0, flange back focus 12mm, can be adapted to F-mount, C-mount and other threaded lenses through the adapter ring.
IO and Power Interface	12 pole industrial circular connector
Optical filter	Full Band Transparency Enhancer
Dimension	59mm×59.0mm×33.5mm
Weight	Approx. 211g
IP Protection Rating	IP40 (with lens and cables installed correctly)
Temperature	Working temperature: -10℃~50℃, storage temperature: -20℃~70℃.
Humidity	5% ~ 90%RH (no condensation)）
Software and Protocols
Software	SDK development kit, and associated demo/calibration software DemoCam3
Operating Systems	Windows7/10 32/64bit； PC Linux 32/64bit
Protocols/Standards	GigEVision， GenICam
Certifications	CE， RoHS
Performance	Parameters

Key Features

High sensitivity, low noise, low power consumption
support 1 line, 2 lines, 4 lines TDI
Support bright/dark field correction, support lens shadow, aberration correction, light source uniformity correction, etc.
Support multi-group lens distortion correction parameter writing and storing.
Built-in large-capacity frame buffer, safe and reliable verification and repair technology, to ensure reliable transmission
Frame timeout function, to improve the camera’s fault tolerance for mechanical motion jamming for a long time.
Software compatible with GigE Vision, GenlCam protocols
Dimensions: 59mmx59.0mmx33.5mm

EDL4096-410GM

Key Features

Dimension Drawing

Spectral Response